High-Resolution Display: With a pixel density of 1080×2220, this display ensures sharp and clear images, making it perfect for applications that require high-quality visuals.
AMOLED Technology: Utilizing Active Matrix Organic Light-Emitting Diode (AMOLED) technology, each pixel is self-emissive, allowing for deep blacks, vibrant colors, and a high contrast ratio. This makes the display highly efficient and visually appealing.
MIPI Interface: The display supports the Mobile Industry Processor Interface (MIPI), ensuring fast and reliable data transfer. This industry-standard interface allows seamless integration into mobile and handheld devices.
High Brightness: With a brightness level of 400cd/m², the display ensures visibility even in bright environments, making it ideal for outdoor usage or areas with high ambient light.
|
LCD size(inch): |
5.9 (Diagonal) |
|
Resolution: |
1080(H)×2220(V) |
|
Pixel Pitch: |
30.35(H)x60.7(V) |
|
Active Area(mm): |
65.56(H)×134.75(V) |
|
Module Size(mm): |
67.716×140.654×0.84 |
|
Display type: |
AMOLED |
|
Interface: |
MIPI |
|
View Direction: |
ALL |
| Power Supply: | 3.3 |
| Luminance(cd/m2): |
400(Typ.) |
Interface:
|
Pin No. |
Symbol |
I/O |
Description |
| 1 |
GND |
P |
Ground. |
| 2 | ELVSS | P |
Negative power supply for panel. |
| 3 | D3N | I |
MIPI DSI Negative differential data signal. |
| 4 | ELVSS | I | Negative power supply for panel. |
| 5 |
D3P |
I |
MIPI DSI Positive differential data signal. |
| 6 | ELVSS | P | Negative power supply for panel. |
| 7 | GND | P | Ground. |
| 8 | NC | - | No connection. |
| 9 | D0N | I | MIPI DSI Negative differential data signal. |
| 10 | ELVDD | P | Positive power supply for panel. |
| 11 | D0P | I | MIPI DSI Positive differential data signal. |
| 12 | ELVDD | P |
Positive power supply for panel. |
| 13 | GND | P | Ground. |
| 14 | ELVDD | P |
Positive power supply for panel. |
| 15 |
CLKN |
I |
MIPI DSI Negative clock signal. |
| 16 | AVDD | P | Signal analog voltage. |
| 17 | CLKN | I |
MIPI DSI Positive clock signal. |
| 18 | VCI | P | Supply analog voltage. |
| 19 | GND | P | Ground. |
| 20 | VDDI | P | Power supply for I/O block provided from outside. |
| 21 | D1N | I | MIPI DSI Negative differential data signal. |
| 22 | NC | - | No connection. |
| 23 | D1P | I | MIPI DSI Positive differential data signal. |
| 24 | EL_CTRL | O | PMIC control signal. |
| 25 | GND | P | Ground. |
| 26 | EL_EN | O | PMIC enable signal. |
| 27 | D2N | I | MIPI DSI Negative differential data signal. |
| 28 | TE | O |
Monitor pin of TE (Tearing Effect) logic signal.When this pad is not activated, this signal stays low. |
| 29 | D2P | I | MIPI DSI Positive differential data signal. |
| 30 | ERR_FG | O | Purpose on test for MIPI status. |
| 31 | GND | P | Ground. |
| 32 | RESX | P |
Active low. This signal is used to reset the device and must be applied to initialize the chip properly. |
| 33 | NC | - | No connection. |
| 34 | GND | P | Ground. |
| 35 | NC | - | No Connection. |
| 36 | VTOP | P | External Voltage Input for OTP DataProgram. |
| 37 | NC | - | No Connection. |
| 38 | VDDI | P | Power supply for I/O block provided from outside. |
| 39 | GND | P | Ground. |
Electrical Characteristics:
|
Parameter |
Symbol: |
Min. |
Typ. |
Max. |
Unit |
|
AMOLED Power positive |
ELVDD |
--- |
4.6 |
--- |
V |
| AMOLED Power negative | ELVSS | --- | -2.5 | --- | V |
